The ship
According to the kit description, the Belle Poule is a training schooner of the French Navy. She and her sister ship Étoile were launched at the Fécamp yard in Normandy on 8 February 1932. She is 37.5 metres long, displaces 225 tons and makes up to 12.5 knots under sail and up to 9 knots under her diesel engine.
The kit
Kit D021 is a design by Daniel Dusek himself. In 1:50 the model is 755 mm long, 255 mm wide and 655 mm high. The box contains thirteen sheets of smaller plans and one full-size plan, the instructions (in French, with English and Czech versions available online), sixteen sheets of laser-cut wood in plywood, veneer and pear, dowels for masts and yards, high-quality resin parts, a photo-etched brass sheet, fine-meshed sail cloth, copper foil, rigging thread and all the small parts – blocks, chain, fittings – and a French flag. Everything is stored safely and tidily in the box.

Resin parts and copper foil
Let’s start with the high-quality resin parts: the boats and many deck fittings, cleanly cast. There is also enough copper foil for the hull.


Wood
For masts and yards there are very nice dowels, and a few pear strips. The quality of the wood is excellent. Why so few strips? Because all the planks are lasered pre-spiled, as we will see in a moment.

Pre-spiled planks on veneer
The planks are lasered on thin veneer. The deck has its planks already lasered – perfectly – and the further veneer sheets carry all the pre-spiled hull planks. The keel and frames are cut from 4 mm plywood.



Photo-etch, small parts and sail cloth
The photo-etched parts are extensive. The small parts and the rigging thread are packed separately, and for everyone who loves sails there is a fine-meshed sail cloth.



Plans and instructions
Instructions and plans are essential for every good kit. As usual with Dusek, the instructions come in several languages – here French in the box, with English and Czech available online. They are well done, and an intermediate modeller should have no problem at all. Thirteen smaller sheets show all the details of the schooner and help to identify the parts, and last but not least one big sheet shows the model in 1:1.


Conclusion
A really nice kit designed by Daniel Dusek. The lasered pre-spiled planks make it much easier to plank a more complex hull like that of the Belle Poule. All parts are made of high-quality materials, and you can see the attention to detail in this Dusek kit as well. The instructions leave few if any questions open, and the plans are drawn in detail and printed very well. Dusek Ship Kits listed the model at € 369 at the time, which I think is really good value. My sincere thanks go to Daniel Dusek for sending this kit for review.
Pro
- Pre-spiled, lasered planks
- High-quality resin parts
- Photo-etch
- Detailed plans incl. a full-size sheet
- Good instructions, online in English, French and Czech
Contra
None
