The ship
According to the kit description, La Gloire was a classic frigate of the French Navy at the end of the 18th century, armed with 26 twelve-pounders on the battery deck and four six-pounders and four carronades on the upper deck. She was designed by the naval engineer Guignace and launched at Saint-Malo in 1778. The model shows her in her first year in service, with the bottom painted white – a year later, in June 1779, her underwater hull was sheathed with copper plates against corrosion, like that of many other ships.
The kit
In 2016 Daniel Dusek bought the rights to all Mamoli and MiniMamoli kits, and since then they have been re-released in batches – so this kit, number MV34, is available again for the passionate builder. In 1:90 the model is 840 mm long and 635 mm high.
The box contains six sheets of plans in A2, twelve sheets of instructions in English, French, German and Italian in A3, two sheets with the model in full size, twelve sheets of lasered plywood and walnut, dowels for masts and yards, strip wood, one photo-etched brass sheet, cast Britannia-metal parts, rigging thread and all the small parts – blocks, chain, fittings – and flags. Everything is stored safely and tidily in the box.

Laser-cut parts
The plywood is perfectly lasered, and so are the other cut sheets, including the walnut parts for the details.


There is one sheet of photo-etched parts, made in two layers.

Wood
A nice collection of wood: very good dowels for masts and yards, plus a number of pear strips for the build. The quality of the wood is excellent.

Fittings
The smaller parts are packed in a compartment box. The cast Britannia-metal parts are of high quality: decorations, the name boards, a ship’s boat, the guns, anchors and many small fittings. Blocks, deadeyes, brass pins and the rigging thread complete the set.



Plans and instructions
Instructions and plans are essential for every good kit. As usual with Dusek, the instructions come in several languages – here English, French, German and Italian. They are well done, and an intermediate modeller should have no problem at all. The plans have not yet been revised by Daniel Dusek, but they do their job well and leave few if any questions unanswered; they are drawn in detail and printed very well. Last but not least there are two big sheets showing the model in 1:1.


Conclusion
The plans and instructions fulfil their task well, the woods are of very good quality, and so are the cast metal parts. All parts are made of high-quality materials, and you can see the attention to detail in this Dusek kit as well. Dusek Ship Kits lists the model at € 349, which I think is really good value for money. My sincere thanks go to Daniel Dusek for sending this kit for review.
Pro
- Excellent wood, incl. walnut and pear strips
- Two-layer photo-etch
- High-quality Britannia metal castings
- Detailed plans incl. two full-size sheets
- Multilingual instructions
Contra
- Plans and instructions not yet revised by Dusek
